English | العربية

CV

Mohammed Hamdan,

Professor of Mechanical Engineering

Department of Mechanical Engineering

Faculty of Engineering and technology

AL-Zaytoonah University of Jordan

P.O. Box 130

Amman 11733, Jordan.

Email: m.hamdan@zuj.edu.jo or mashamdan@yahoo.com

ACADEMIC QUALIFICATIONS

Ph. D. in Mechanical Engineering, 1985

Washington State University, USA

M. Sc. in Mechanical Engineering, 1977

University of Leeds, UK

B. Sc. in Mecahnical Engineering, 1976

University of Wales, UK

PROFESSIONAL EXPERIENCE

  • Professor of Mechanical Engineering, University of Jordan, Jordan (1995 – present)
  • Professor of Mechanical Engineering, Al Zaytoonah University of Jordan, Jordan (2009 – present). (unpaid leave)
  • Dean of faculty of engineering, Al-Zaytoonah Private University of Jordan, Jordan, (9/2009 –9/2014)
  • Engineering sector Advisor, Higher council for science and technology, Jordan,(2008 – 2009)
  • Dean of faculty of engineering, Hashmite University, Jordan, (2001 – 2003)
  • Dean of faculty of engineering and Technology, University of Jordan, Jordan, (1997 – 2001)
  • Chairman of Mechanical Engineering Department, University of Jordan, Jordan (1995 – 1997) and (1991-1993)
  • Chairman of Mechanical Engineering Department, Philadelphia University, Jordan (1993 –1994)
  • Associate Professor of Mechanical Engineering, University of Jordan, Jordan (1990 –1995)
  • Assistant Professor of Mechanical Engineering, University of Jordan, Jordan (1985–1990)
  • Teaching Assistant, Washington State University , Pullman, WA, USA (1983-1984)
  • Research Assistant. Washington State University , Pullman, WA, USA (1981-1983)
  • Lecturer, Mechanical Engineering Department, University of Jordan, Jordan (1979-1980)

Supervised: Masters and PhD degree students

Published: More than 110 papers in refereed journals and conferences

Professional Development Activities in the last six years

  • Organizing Committee, Zaytoonah University International Engineering Conference on Design and Innovation in Sustainability 2014 (ZEC Sustainability 2014), 2014.
  • Organizing Committee, the Fourth Global Conference on Renewable and Energy Efficiency for Desert Regions (GCREEDER), 2013
  • Organizing Committee, International conference on Renewable Energy and its Future in the Arab world 2013, 2013.
  • Organizing Committee, Zaytoonah University International Engineering Conference on Design and Innovation in Infrastructure 2012 (ZEC infrastructure 2012), 2012.
  • Organizing Committee, the Third Global Conference on Renewable and Energy Efficiency for Desert Regions (GCREEDER), 2011
  • Visiting professor at Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen –Germany .Summer 2012.
  • Visiting professor at Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen –Germany .Summer 2011
  • Visiting professor at Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen –Germany .Summer 2010
  • Visiting professor at Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen –Germany .Summer 2008
  • Visiting professor at Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen –Germany .Summer 2007
  • Visiting professor at Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen –Germany .Summer 2006

Awards

  • Hisham Hijawey for the design construction and testing of a solar pond (1997)

JOURNAL PUBLISHED RESEARCH

  1. M. A. Hamdan and B. A. Jubran “The effect of Ethanol addition on the   performance of Diesel and Petrol engines” Dirasat (University of Jordan),  Vol.XIII No.10 (1986).
  2. S. M. Habali, M. A. Hamdan, B. A. Jubran and A. O. Zaid “Wind speed and energy potential of Jordan” Journal of the International Solar Energy Society. Vol.38, No.1, pp. 59–70 (1987).
  3. S. M. Habali, M. A. hamdan, B. A. Jubran and A. O. Zaid ” Laminar to turbulent transition: Free stream turbulence, favorable pressure gradients and surface roughness effects”, Dirasat (University of Jordan), Vol. XIV, No. 9, (1987).
  4. S. M. Habali, M. A. hamdan, B. A. Jubran and A. O. Zaid “Assessment and application of wind energy of Jordan”, J. of the Int. Solar Energy Society., vol. 40, no 2, pp.99-105 (1988).
  5. S. M. Habali, M. A. S. Hamdan, B. A. Jubran and Adnan I. O. Zaid “Optimization of insulation thickens in a long term solar storage system”, Solar & Wind Technology, Vol. 5, No. 1, pp. 75-82 (1988).
  6. S. M. Habali, M. A. S. Hamdan, B. A. Jubran, and Adnan I. O. Zaid  “strategies for solar heating system” Solar & Wind Technology. Vol. 5, No1, pp. 83-91 (1988).
  7. B. A. Jubran, S. A. Habali, M. A. Hamdan, and I. O. Zaid, “Some mechanical and thermal properties of clay bricks for the Jordan valley region” RILEM Journal. Material and Structures”, Vol. 21, pp.364- 369. (1988).France.
  8. B. A. Jubran, S. M. Habali, M. A. Hamdan and M. Amr, ”Energy saving potential in swimming pools in Amman” ,DIRASAT, Vol.  IV, No.6, PP. 253-264.1988.
  9. A. I. O. Zaid, S. M. Habali, M. A. Hamdan, and B. A. Jubran, ”The potential and application of renewable energy in Jordan” Proceeding of energex 88, vol.3, section XIII-XVIII, Nov. 1988.
  10. M. A. Hamdan, S. M. Habali,and B. A. Jubran, “Community solar heating system: a case study for Jordan”, International Journal of Sustainable Energy, vol. 7, no. 2, pp. 85-91 1989
  11. S.M.Habali, B.A.Jubran, M.A.Hamdan, and M.K.Abdelazeez, “Evaluation of industrial noise in Jordan”, Journal of Applied Acoustics vol.28, no.4, Pages 253-262 (1989).
  12. B.A.Jubran, S.M.Habali, and M.A.Hamdan. “Correlations of transitional boundary layer over a rough surface”, DIRASAT (university of Jordan), vol.17, no. 1 (1990).
  13. M. A. Hamdan, B. A. Jubran and R. M. Rasheed “Energy conservation in traffic”, Energy Conversion and Management, vol.32, no.6, pp.515-518, (1991)
  14. B.A.Jubran, M.A.Hamdan, and W.Manfalouty.”Modelling of free convection in a modified trombe wall”, Renewable Energy an International Journal. vol. 1, no.4 (1991).
  15. M.A.Hamdan and A.Al-Sayeh.”Diffuse and global solar radiation  correlations for Jordan”, International Journal of Sustainable Energy, vol.10, pp.145-154 (1991).
  16. A.A.Amer, B.A.Jubran, and M.A.Hamdan. “Comparison of different two-equation turbulence models for prediction of film cooling from two row of holes”, J. Numerical Heat Transfer, part a. vol. 21, no. 2, pp.143- 163 (1992).
  17. M.A.Hamdan, B.A.Jubran. “Thermal performance of three types of solar air collectors for the Jordanian climate”, J. Energy, vol. 17, no2, pp. 173- 17, (1992).
  18. B.A.Jubran, M.A.Mamdan and A.R.Mansour “Some experimental aspects of drag reduction in thermoplastic pipes” Polymer-Plastics Technology and Engineering. vol.31,pp.259-269 (1992).
  19. M.A.Hamdan, A.I.Al-Sayeh and B.A.Jubran “Solar hybrid heating systems for greenhouses”, Applied Energy Journal, vol. 41, no 4, pp.251-260 (1992).
  20. M.A.Hamdan, B.A.Jubran “Some theoretical and experimental aspects of built-in solar storage” Renewable Energy an International Journal vol.2, no.3 (1992).
  21. B.A.Jubran, M.A.Hamdan, and A.R.Mansour, “Drag reduction by chemical additive in capillary tubes and square ducts” Journal of Engineering Fluid Mechanics, vol,5, no.4, pp.481-499. (1992).
  22. M.A.Hamdan, A.I.Zaid, S.M.Habali and B.A.Jubran “Olive cake as an alternative source of energy in Jordan” Mu’tah Journal for Research and Studies. University of Mu’tah. Vol. 8, no. 6 (1993). In Arabic.
  23. M.A.Hamdan and N.Gazzawi “The effects of clouds on solar radiation” energy conversion and management Vol.34, no.1 pp.29-32 (1993).
  24. B.A.Jubran, A.R.Mansour, M.A.Hamdan and B.Tashtoush “An approximate analytical solution for the prediction of transient responses of the trombe wall” international communications in heat and mass transfer journal.Vol.20, Number 4, pp.567-577 (1993).
  25. M.A.Hamdan, B.A.Jubran, and S, Remawi. “Water conservation in solar domestic hot water systems.” energy conversion and management, Vol.34, no.4, Pages 287-291 (1993).
  26. M.A.Hamdan “Theoretical and experimental study of integrated rock-bed thermal storage system” Int.J. Solar energy. Vol. 14, no.1 (1993).
  27. B.A.Jubran, M.A.Hamdan and R.M.Abdualh “Enhanced heat transfer, missing pin, and optimization for cylindrical fin pins arrays” ASME trans. journal of engineering heat transfer. Vol. 115, No. 1(1993).
  28. B.A.Jubran, M.A.Hamdan and A.R.Mansour “Drag reduction using pure natural honey, with particular reference to biomedical engineering”, Polymer-Plastics Technology and Engineering, Vol. 33, no 1, pp. 37-53, (1994).
  29. M.A.Hamdan “Solar radiation data for Amman” applied energy Journal, Vol.47, No. 1 , Pages 87-96 (1994).
  30. M.A.Hamdan “Thermal gain through windows” energy conversion and Manegment.Vol.35, No. 6, Pages 501-506 (1994).
  31. B.A.Jubran, M.A.Hamdan and A.S.Awwad, “Prediction of transitional boundary layer over smooth and rough surfaces.” Encyclopedia of fluid mechanics” advances in flow dynamics. p.139 (1994).
  32. B.A.Jubran and M.A.Hamdan “Optimization of cylindrical pin fin arrays with an accelerated flow based on forced convective heat transfer” International Journal of heat and technology. Vol. 12, no. 1 (1994).
  33. B.A.Jubran, M.A.Hamdan and A.I.Al-Sayeh “Transition modeling for the prediction of heat transfer coefficient of a gas turbine blade” applied energy journal, Vol. 49 (1994).
  34. M.A.Hamdan and I.M.Abu-Zahra “Thermal energy storage in fluidized bed storage system” heat and technology. Vol. 12, no. 1 (1994).
  35. Ali Badran and M.A.Hamdan “Inverted trickle solar still” International Journal Solar Energy, Vol. 17, No. 1, pp. 51-60 (1995).
  36. M.A.Hamdan and B.A.Kakish “Solar radiation attenuation caused by atmospheric pollution “, Energy conversion and management. Vol. 36, No.2, Pages 121-12 (1995).
  37. M.A.Hamdan “Simulation and experimental analysis of built in solar water heater” International Journal of Sustainable Energy, Vol.18, pp. 33-40 (1995).
  38. B.A. Jubran, S.A. Swiety and M.A. Hamdan, “Convective heat transfer and pressure drop characteristics of various array configurations to simulate the cooling of electronic modules,” International Journal of Heat and Mass Transfer, Vol. 39, No. 16, pp. 3519-3529, 1996.
  39. M. A. Hamdan and F. A. Elwerr “Thermal energy storage using a phase change material” Solar Energy, Vol.56, No.2, pp.183-189 (1996)
  40. B.A. Jubran, A. Albaz, M.A. Hamdan, and A.A. Badran, “Experimental  investigation of local clays and clay schemes as liners for solar ponds,” Int. Journal of Energy Research, Vol. 20, No. 7, pp. 637-642, (1996).
  41. B.A.Jubran, A.Al-Baz, M.A.Hamdan and A.A.Badran “Effects of climatic conditions on the performance of carnallite solar ponds”. Int. Journal of Energy Research, Vol.20, pp.1037-1048 (1996)
  42. B.A.Jubran, A.A.Badran and M.A.Hamdan “Solar energy augmentation of a carnalite solar pond using inverted trickle collectors”. Energy conversion and management. Vol. 38, No. 3, pp.245-252 (1997).
  43. A.A.Badran, B.A.Jubran, E.M.Qasem and M.A.Hamdan “Numerical   mode for the behavior of a salt -gradient solar- pond greenhouse- heating   system” Applied Energy. Vol.  58, no.1 pp. 57-72 (1997).
  44. M.A.Hamdan and A.Qubbaj “Inhibition effect of inert compounds on oil shale dust explosion”. Applied Thermal Engineering, Vol.18, No. 5, pp. 221-229 (1998).
  45. M.A.Hamdan “Investigation of an inexpensive solar collector storage system” Energy conversion and management. Vol. 39, No. 5/6, pp. 415-420(1998).
  46. Ali Badran and M.A.Hamdan “Utilization of solar energy for heating fuel oil”, Energy conversion and   management. Vol. 39, no. ½ pp.  105-111 (1998).
  47. M.A.Hamdan, A.M.Musa and B.A.Jubran “The performance of solar still under Jordanian climate” Energy conversion and management. Vol. 40, pp 495-503 (1998).
  48. M. A. hamdan and S. M. El-Azzam ‘ Direct combustion of oil shale using a  circulating fluidized bed combustor” Dirasat ( University of Jordan)  Vol. 26, n0. 2 (1999).
  49. Y.Khraish and M.A.Hamdan “Direct combustion of olive cake using fluidized bed combustor”   Energy Resources. Vol. 21. No. 4 (1999).
  50. Hamdan, M., Al-Nimr, M.A. and Alkam, M. ‘Enhancing forced convection by inserting porous substrate in the core of a parallel-plate channel’, Int. J. Numerical Methods for Heat and Fluid Flow, Vol. 10(5), pp. 502-517 (2000).
  51. Khraisha, Y.H., Hamdan, M.A., and Quibia, J. M., ‘Combustion of Spent Lube Oil After Mixing with Kerosene or Diesel’, Energy Sources, 23, 757-765 (2001).
  52. Alkam, M., Al-Nimr, M.A. and Hamdan, M., “Enhancing heat transfer in parallel-plate channels by using porous inserts“, Int. J. Heat and Mass Transfer, Vol. 44(5), pp. 931-938 (2001)
  53. Al-Nimr, M.A., Odat, M. and Hamdan, M., “Superconductors thermal stability under the effect of the hyperbolic heat conduction model” JSME, International Journal. Series B, Vol. 45, No. 2 (2002).
  54. Al-Odat, M., Al-Nimr, M.A., and Hamdan, M. A, “Thermal stability of superconductor under the effect of a two-dimensional hyperbolic heat conduction model”, International journal of numerical methods in heat and fluid flow.  Vol. 12. No.2. pp. 163-177 (2002).
  55. Al-Odat, M., Al-Nimr, M.A., and Hamdan, M., “Superconductors thermal stability under the effect of the dual-phase-lag heat conduction model”, International Journal of Thermophysics . Vol.23, No.3. pp.856-868(2002)
  56. M. A Hamdan and T.A. Al-Subaih “Improvement of locally produced gasoline and studying its effect on both the performance of the engine and the environment” Energy conversion and management. Vol.43. pp.1811-1820 (2002).
  57. Mohammed A. Hamdan “Combustion behavior of pulverized oil shale” Pacific and Asian Journal of Energy. Vol. 11(1). Pp.23-30 (2001).
  58. Mohammed A. Hamdan “Layered wall design to prevent moisture condensation on its inside surface” Energy conversion and management. Vol.43. pp. 1821-1828 (2002).
  59. A. A. Badran and M. A. Hamdan “Comparative study for under-floor heating using solar collectors or solar ponds”, Applied Energy. Vol.77. pp. 107-117 (2004).
  60. Mohammed A. Hamdan and I. Al-Hinti “Analysis of heat transfer during the melting of a phase-change material” Applied Thermal Engineering. Vol. 24, Issue 13,  pp.1935-1944 (2004).
  61. M. A. Hamdan and A. Sakhrieh “Dust explosion of oil shale and olive cake solid fuels: a comparison study” International Journal of Energy Research. Vol. 29, Issue 10, PP.871-878 (2005).
  62. A. Benmansour, M.A. Hamdan and A. Bengeuddach “Experimental and numerical investigation of solid particles thermal energy storage unit”   Applied   Thermal Engineering, Vol. 26, Issues 5-6 (2006).
  63. M.A. Hamdan and A. M. Al-qaq “The prediction of heat transfer coefficient in Circulating fluidized bed combustors.” Energy Conversion and Management Volume 49, Issue 11, November 2008, Pages 3274-3277
  64. R. Haj Khalil, A. Sakhrieh and M. Hamdan “Effect of pressure and inlet velocity on the adiabatic flame temperature of a methane air flame“, The  Jordan Journal of Mechanical and Industrial Engineering , Hashemite University, Volume 4, Number 1, Jan. 2010, Pages 21 – 28.
  65. M. A. Hamdan, M. A. Al-Nimr and Vladimir A. Hammoudeh.” Effect of Second Order Velocity-Slip/Temperature-Jump on Basic Gaseous Fluctuating Micro-Flows”.  Journal of Fluids Engineering (Vol.132, Iss.7): (2010).
  66. A. Sakhrieh, M. A. Hamdan and Y.Abdullat  “Experimental Study of Oil Shale and Olive Cake Dust Explosion by Burning Mixtures of Coarse and Fine Particles “, The  Jordan Journal of Mechanical and Industrial Engineering , Hashemite University, Volume 4, Number 2, March. 2010, Pages 300 – 303.
  67. M. A. Al-Nimr, Vladimir A. Hammoudeh and M. A. Hamdan. “ Effect of Velocity-Slip Boundary Conditions on Jeffery-Hamel Flow Solution.”  Journal of Applied Mechanics, Volume 77, Issue 4, (2010).
  68. M. A. Hamdan and R. A. Haj Khalil “Simulation of compression engine powered by biofuels”.  Energy Conversion and Management, Volume 51, Issue 8, August 2010, Pages 1714-1718
  69. A. Alahmer, J. Yamin, A. Sakhrieh, M.A. Hamdan. “Engine performance using emulsified diesel fuel “, Energy Conversion and Management, Volume 51, Issue 8, August 2010, Pages 1708-1713.
  70. Al Asfar, J. J., Hamdan, M. A., Yamin, J. and Abdullat, Y. “Theoretical Study of Hydrogen Flow in Porous Medium of Local Sweileh Sand.” International journal of Energy Conversion and Management vol. 51 (2010), pp. 1727-1734.
  71. M. A. Hamdan and J.A. Yamin. “Simulation of an electrical engine powered by fuel cell – solar energy hybrid system” International Journal of Electric and Hybrid Vehicles (IJEHV ), Vol. 2, No. 4, 2010, pp. 308-314(7)
  72. M. A. Hamdan, J. A. Yamin, and R. K. Dabbas “Inhibitory Effect of Solid Inhibitors on LPG Combustible Mixtures”, Journal of the Korean Chemical Society, 2010, Vol. 54, No. 3, pp. 295-299.
  73. Q. Rana, S. Shabbar, J. Isam and H. Mohammed “Material characterization and gasification of Jordanian oil shale, “. International Journal of Energy, Environment, and Economics, 19 (4) (2010), pp. 1–16.
  74. M. A. Hamdan, Jehad Yamin and E. A. Abdelhafez. “Passive cooling roof design under Jordanian climate” Sustainable cities and Society, 2012, volume 5, pages 26–29.
  75. Khalifa Isa Burshaid and Mohammad A. Hamdan. “The reduction of soot formation from fuels using oxygenates additives” ,Energy conversion and management, 2013, Volume 65, Pages 751–754.
  76. A. Fasfous, J. Asfar, A. Al-Salaymeh, A. Sakhrieh, Z. Al_hamamre, A. Al-bawwab, M. Hamdan, “Potential of utilizing solar cooling in The University of Jordan” Energy conversion and management, 2013, Volume 65, Pages 729–735
  77. M.A. Hamdan, S.D. Rossides, R. Haj Khalil, “Thermal energy storage using thermo-chemical heat pump” Energy conversion and management, 2013, Volume 65, Pages 721–724
  78. Y. Abdullat, M. Hamdan, E. Abdelhafez, and A. Sakhrieh, “Development of Neural Networks for Enhancement of thermal energy storage using phase change material” International Journal of Thermal and Environmental Engineering (IJTEE), 2013, volume 5, issue 2 pages 167–173.
  79. M. A. Hamdan, R. A. Haj Khalil and E. A. Abdelhafez “Comparison of Neural Network Models in the Estimation of the Performance of Solar Still under Jordanian Climate” Journal of Clean Energy Technologies (JOCET), Vol. 1, No. 3, May 2013, pages 238-242.
  80. Jehad A. Yamin, Nina Sakhnini, Ahmad Sakhrieh and M. A. Hamdan “Environmental and Performance study of a 4-Stroke CI engine powered with waste oil Biodiesel” Sustainable cities and Society, Vol. 9, December 2013, Pages 32–38
  81. Lubna. B. Mohammed, Mohammad.  A. Hamdan, Eman A. Abdelhafez, and Walid Shaheen. “Hourly Solar Radiation Prediction Based on Nonlinear Autoregressive Exogenous (NARX) Neural Network” Jordan Journal of Mechanical and Industrial Engineering, Vol. 7, Number 1, December 2013, Pages 11–18.
  82. Mohammad Hamdan, Lubna Badri and Eman Abdelhafez “Modeling Triple Solar Still Production Using Jordan Weather Data and Artificial Neural Networks” International Journal of Thermal and Environmental Engineering (IJTEE), 2014, volume 7, Number 2, pages 87-93.
  83. T. Tabazah, M. A. Hamdan, O. Abo Deyab and E. Abdelhafez “Utilization of Water Produced Hydrogen for Domestic Heating Purposes” International Journal of Thermal and Environmental Engineering (IJTEE), 2014, volume 7, Number 2, pages 95-99.
  84. Ala’a M. Al-Falahat , M. A. Hamdan and Jehad A Yamin. “Engine Performance Powered By A Mixture Of Hydrogen And Oxygen Fuel Obtained From Water Electrolysis” International Journal of Automotive Technology,2013,Volume 15, Issue 1, pp 97-101.
  85. M. Abu Mallouh, E. Abdelhafez, M. Salah, M. Hamdan, and B. Surgenor, “Model Development and Analysis of a Mid-Sized Hybrid Fuel Cell Vehicle with a Representative Driving Cycle”, Journal of Power Sources ,2014, Volume 260, Pages 62–71.
  86. Y. Abdullata , A. Sakhrieh ,M. Hamdan “Enhancement of thermal energy storage using phase change material under Jordanian climate”. Accepted for publication in Journal of Infrastructure Systems,2013.
  87. M. Hamdan E.A. Abdelhafez, A. Hamdan and R. A. Hajkhalil “Heat Transfer  Analysis of a Flat-Plate Solar Air Collector by Using Artificial Neural Network” Accepted for publication in Journal of Infrastructure Systems,2014.
  88. E. A. Abdelhafez, M. A. Hamdan, M. Abu mallouh, L. M. Badri, A. Aboushi, “The Effect of Insulation layer to prevent water vapor condensation along the inside surface of a building wall using Neural Network” Accepted for publication in Journal of Infrastructure Systems, 2014.
  89. M. A. Hamdan, A.A. Badran, E. A.  AbdelHafez and A. M. Hamdan” Comparison of neural network models in the estimation of the performance of solar collectors” Accepted for publication in Journal of Infrastructure Systems,2014.
  90. A. D. Hammad, M. A. Hamdan, A. H. Sakhreih and J. Asfar “Performance Study of a Fluidized Bed Combustion Unit for the Jordanian Oil Shale” Accepted for publication in energy sources part B, 2014.
  91. Mohammad H. Salah, Mohammad A. Abu Mallouh, Mohammad Youssef, Eman Abdelhafez, Mohammad Hamdan, and Brian Surgenor, “Hybrid Vehicular Fuel Cell/Battery Powertrain Test Bench: Design, Construction, and Performance Testing” , Submitted for publication (2014).
  92. Mohammad A. Al-Nimr, Anwar H. Al-Assaf, and Mohammad A. Hamdan, “The Effect of Slip-Velocity and Temperature –Jump on the Hydrodynamic and Thermal Behaviors of MHD Forced Convection Flows in Horizontal Microchannels” , Submitted for publication (2014).
  93. Anwar H. Al-Assaf, Mohammad A. Al-Nimr and Mohammad A. Hamdan, “The Effect of Slip-Velocity and Temperature –Jump on the Hydrodynamic and Thermal Behaviors of MHD Free Convection Flows in Vertical Microchannels”, Submitted for publication (2014).
  94. M. S. Hijazi, M. A. Hamdan and J. A. Yamin. “Effect of some oxygenates on the particulate matter level of a DI diesel engine with and without DPF”. Submitted for publications (2013).
  95. E. A. Abdelhafez, M. A. Hamdan and O. F. Ghnaimat “Prediction of Hourly Solar Radiation in Amman-Jordan by Using Artificial Neural Networks” Submitted for publication (2012).

CONFERENCE PUBLISHED RESEARCH:

  1. M. A. Hamdan and W. Grosshandler “Transmittance through nonisothermal combustion gas mixtures” Presented at the 23rd National Heat Transfer Conference. Denver, Colorado (1985).
  2. A. I. Zaid, S. M., M. A. Hamdan,and B. A. Jubran ,”The use of a half-  delta shape votex augmentor in increasing the power output of a wind turbine”, Proceeding of the international conference of energy systems, Amman,15th-17th may,1989.
  3. B.A.Jubran, A.R.Mansour, M.A.Hamdan and B.Tashtoush “A new approximate analytical solution for the prediction of the thermal and hydrodynamic characteristics of the trombe wall”, ASME 28th National Transfer Conference and Exhibition, HTD-VOL.206-2, topics in heat transfer- volume 2. San Diego, CA, USA, Aug. 9-12, pp. 149-159 (1992).
  4. Hamdan, M.A., Khraisha, Y.H. and Al-Dabbas, M., “Combustion of Shale Oil”, Proceedings of the 1st Jordanian Mechanical Eng. Con., Amman, Vol 1, 341-351 (1995)
  5. A. Benmansour and M. A. Hamdan “ Stockage de l’Energie dans un Materiau a changement de phase” CHEMSS’2000. Alger, 13-15 may (2000).
  6. A. Benmansour and M. A. Hamdan” Analyse du Stockage Energie Thermique par chaleur latente,” CIMAS’I, Casablanca, Maroc. (2000).
  7. J. Yamin and M. Hamdan “The performance of hydrogen-powered engine with fuel regulator” Workshop on New Trends and Breakthrough in Hydrogen Energy. Istanbul-Turkey. April 02-25 (2001).
  8. M.A. Al_Dabbas and M.A. Hamdan “ Mathematical modeling of oil shale combustion in circulating fluidized bed combustors” Jordan International Chemical Engineering Conference VI. Amman-Jordan (2002).
  9. Mohammed A. Hamdan and Sahar M. Al-khairi “Solid fuel dust explosions” Accepted for presentation in the First International Exergy, Energy and Environment Conference. Izmer-Turkey .June, 13-17 (2003).
  10. R. A. Haj khalil, M. A. Hamdan and J.  A. Yamin “The effect of locally manufactured gasoline fuels on the performance of an engine and on the environment” The Sixth Jordanian International Mechanical Engineering Conference. Oct. 22-24 2007. Amman—Jordan.
  11. M. N. Hamdan, S. M. Fayyad , M. A. Hamdan..” Six-port model for sound   propagation in a porous media with applications to diesel particulate filters”, 13th International Conference on Applied mechanics and Mechanical Engineering. May 27-29, 2008, Military Technical College Kobry Elkobbah, Cairo, Egypt.
  12. J. Al Asfar, M. Hamdan, J. Yamin,  and  Y. Abdullat, “Experimental Investigation of Hydrogen Storage in Local Materials”.  Alternative Energy Applications Conference, Kuwait, 2-5 November (2009).
  13. Jehad A. Yamin, Nina Sakhnini, Ahmad Sakhrieh and M. A. Hamdan. “Performance of CI engines using Biodiesel as fuel”. GCREEDER international conference, Amman- 2009.
  14. J. Al Asfar, M.   Hamdan, J. Yamin,  and  Y. Abdullat. “Building and Testing of a Simple PEM Fuel Cell”. GCREEDER international conference, Amman- 2009.
  15. A. Sakhrieh, M. Hamdan, “Utilization of Jordanian Oil Shale“, Proceedings of the Fifth Global Conference on Power Control and Optimization, Dubai United Arab Emirates, June 1-3, 2011.
  16. Shadi Eid, Ahmed Al-Salaymeh, Mohammad A. Hamdan, Kais Haddad, Franz Durst. “Online measurements of thermophysical properties of ideal gas mixture in pipes” Zaytoonah University International Engineering Conference on Design and Innovation in Infrastructure 2012 (ZEC Infrastructure 2012), June 18-20, 2012, Amman, Jordan.
  17. M. H. Salah, E. Abdelhafez, M. Abu Mallouh, and M. Hamdan” Development and analysis of artificial neural network-based models for electrical actuated automotive cooling systems” 9th International Symposium on Mechatronics and its Applications (ISMA 2013), April 9-11, 2013 Amman, Jordan.
  18. M. Abu mallouh, B. Surgenor, E. Abdelhafez, M. Salah, M. Hamdan and M. Yousef, “Development of Driving Cycle for Amman City with Performance Evaluation for ICE Vehicle” ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, Copenhagen, Denmark, June 25-27, 2014.
  19. M. Abu mallouh, B. Surgenor, M. Salah, E. Abdelhafez,  A. Hamdan and M. Hamdan, “Performance Comparison of Different Power Management Control Strategies for a Hybrid Fuel Cell/Battery Vehicle” ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, Copenhagen, Denmark, June 25-27, 2014.

 

 

 

Thanks for downloading!

Top